Qwikmix™ Wall Putty
Qwikmix™ Wall Putty is a white cement based putty, ideal for use on concrete/mortar, internal/external walls and Ceilings. It fills the fine pores of mortar/concrete walls and ceilings and provides a white, smooth and dry surface essential for painting. It gives excellent adhesive strength, durability and enhances the life of paints.
1. Features & Benefits
- It can be applied on both Interior and Exterior surfaces.
- It does not require any curing.
- It can be used on new as well as old walls/ceilings.
- It will give a smooth and glossy finish.
- Any kind of Paint or Distemper can be applied on it.
- It prevents the growth of algae and fungi on walls.
- Qwikmix™ Wall Putty is water and UV resistant.
2. Mixing Method
- Take water in bucket and gradually add Qwikmix™ Wall Putty in it.
- Mix the product with water in the ratio of approximately 1:3.
- Mixing can be done manually or by stirrer.
- Mixing to be done till homogenous lump -free paste is obtained.
- After mixing leave the paste for 5-10 minutes for polymeric dispersion before application.
- The paste should be kept away from direct sunlight, heat and used within 120 minutes of preparation (after mixing with water).
- Re -mix the paste again before application.
3. Shelf Life
- Qwikmix™ Wall Putty can be safely stored up to 6 months.
- Keep in a dry place above the ground level and well covered.
4. Preparation of the surface
- Surface should be clean and free from dust, oil, grease, curing agent, paints, which may affect the adhesion.
- Remove all the loosely adhered material from the wall surface with the help of emery stone or wire brush and clean water.
- Properly cure the dry surface with the sufficient quantity of clean water before application of putty.
5. Application of Qwikmix™ Wall Putty
- Apply the first coat of Qwikmix™ Wall Putty on already moistened wall surface from bottom to upward direction with the help of putty trowel.
- Allow the first coat of putty to dry for atleast for 3 hours before application of second coat of putty. Apply the second coat of putty from bottom to upward direction.
- Allow the second coat to dry completely for 12 hours. The total thickness of coat should not exceed more than 2 mm.
- Rub the surface very gently with very fine emery paper before application of paint.
6. Useful Tips
- Qwikmix™ Wall Putty should be stored in a dry place. Keep out of reach of the children. Avoid inhalation of dust.
- In case of contact with eyes, rinse eyes with plenty of water and consult a doctor immediately.
Disclaimer
To the best of our knowledge, the information contained herein is accurate. However, neither Saanvi Drymix Mortars Pvt Ltd. or Qwikmix™, assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
Qwikmix™ Wall Putty is a white cement based putty, ideal for use on concrete/mortar, internal/external walls and Ceilings. It fills the fine pores of mortar/concrete walls and ceilings and provides a white, smooth and dry surface essential for painting. It gives excellent adhesive strength, durability and enhances the life of paints.
| Color | White |
| Form | Dry Powder |
| Mix Proportion | 30-35% by weight |
| Pot Life | 120 mins |
| Bulk Density | 1150 kg / CuM |
| Coverage | 12/sft area considering 2mm thickness |
| Compressive Strength, 28day | 8.00 - 11.00N/mm² |
| Adhesion Strength, 28day | 0.90 - 1.00N/nm² |
Disclaimer
To the best of our knowledge, the information contained herein is accurate. However, neither Saanvi Drymix Mortars Pvt Ltd. or Qwikmix™, assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
