Qwikmix™ Tile Grout
Qwikmix™ Tile Grout is a Cement-based grout for wall and floor tiling works in interior and exterior.
1. Mixing Procedure
- Mix Tile Grout with the required amount of clean water. Mix thoroughly with a mechanical mixer until mixture is homogeneous.
- Allow the mix to stand for approx. 10 minutes. Mix again and the grout is ready for use.
2. Application Procedure
- Tile grouting can be done 1 to 3 days after tiling. The joints should be clean.
- Fixing mortar or adhesive should not rise over half the depth of the joints. Excess mortar or adhesive should be removed.
- To ensure colour uniformity especially when using dark colours, the tiles should be grouted with as dry grout as possible.
- A rubber trowel or a cellular rubber-coated float may be used for applying the grout.
- The grout is applied diagonally over the tiles and pressed firmly into the joints until they are completely filled. Excess grout on tiles should be removed.
- The tools should be cleaned with water immediately after use.
- The grout should be allowed to dry for 15 to 30 minutes depending on temperature and humidity. A damp sponge is then used to clean the tile surface.
- Use as little water as possible for cleaning the joints and the tiles.
- To make cleaning easier, unglazed tiles should be moistened with a damp sponge before grouting.
- Tile surface is left to dry before final wiping with dry cloth.
- While wiping and polishing, do not rub the joints too hard. In dry conditions, curing may be necessary.
3. Storage and Packing
Qwikmix™ Tile Grout is delivered in 1kg & 500gm pouch. Storage life is 12 months if product is stored in sheltered and dry place.
Disclaimer
To the best of our knowledge, the information contained herein is accurate. However, neither Saanvi Drymix Mortars Pvt Ltd. or Qwikmix™, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
Qwikmix™ Tile Grout is a Cement-based grout for wall and floor tiling works in interior and exterior.
| Color | Grey/White/Coloured |
| Binder | Ordinary Portland Cement |
| Filler | Graded limestone powder |
| Additives | Water soluble additives to improve consistency, workability and adhesion strength. |
| Join width | 2 - 10mm |
| Consumption | 0.7 to 1.5kg/m² (Depending on the size and thickness of the title and the width of joint) |
| Water demand | Approx. 27° |
| Pot life | 45 minutes |
| Compressive strength | > 4N/mm² after 7days |
| Flexural strength | > 3N/mm² after 7days) |
Disclaimer
To the best of our knowledge, the information contained herein is accurate. However, neither Saanvi Drymix Mortars Pvt Ltd. or Qwikmix™, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
